Troubleshooting juicer problems

Some frequently occurring juicer problems and their solutions are given in the the following table:

Problems:1. Unit fails to start
Solution :

•  Ensure cord is plugged-in properly 
• Ensure power supply is active 
• Ensure the juicer is switched -on

Problems:2. Motor stopped 

Solution :

• Ensure cord is plugged -in properly 
• Ensure parts are correctly assembled 
• Switch -off the juicer and unplug 
• Let the juicer cool down from overheating 

Problems :3. Juicer noisy 

Solution :

• Switch -off the juicer and unplug 
• Ensure parts are correctly assembled 
• Ensure juicer is on level surface 
• Ensure ingredients are cut properly 

Problems :4. Juicer leaks from top

Solution :

• Switch -off the juicer and unplug 
• Check that the compression silicone is assembled properlyb
• If not, dissemble the juicer 
• Assemble the compression silicone properly 

Problems :5. Discoloration of plastic parts 

Solution :

• Clean the juicer after every use 
• Rub the discoloured parts with cooking oil
• Clean with mild soap 
• Remove and clean silicone parts separately 

Problems :6. Mold in silicon parts 

Solution :

• Remove and clean silicon parts separately 

Problem :7. Strainer damaged 

Solution :

• Refer to instruction manual for proper usage 
• Avoid overcrowding food or forcing food down the chute 

Problem :8. Attachments deformed 

Solution :

• Avoid cleaning parts in dishwasher 
• Do not harsh cleaners 

Problem :9. Too much pulp with juicer 

Solution :

• Cut food into smaller parts 
• Insert food slowly 
• Allow all the pulp to eject before adding more food 

Problem :10. Reduce juicer output 

Solution :

• Ensure that the spout is fully opened 
• Ensure that there is no excess pulp in filter basket 
• If yes, stop the juicer and clean filter basket 

Problem :11. Handle lock not closing 

Solution : 

• Push down on the locking tab 
• Open the lock fully 
• Press down and close the lock properly