Parts of Mixer

1. Lid 
2. Liquidizing jar 
3. Dry grinding jar 
4. Wet grinding jar 
5. Blender grinding blade 
6. Dry grinding blade 
7. Wet grinding blade 
8. Base unit 

Before First Use 

The following figure lists the things to check before using the mixer/grinder for the first time:

• Check that all parts are present 
• Check for any damage to the unit or attachments 
• Wash the jars, lids and blades in warm soapy water 
• Clean the body with soft damp cloth 
• Ensure that the motor shaft rotates freely and smoothly 
• Ensure that the jar shaft rotates freely and smoothly 

Using Mixer / Grinder 

A mixer/grinder is very simple and easy to use. The following figure lists the steps of using a mixer/grinder:

• Select the required jar 
• Fill the jar with ingredients 
• Close the jar with lid 
• Position the jar on the base unit 
• Turn the jar clockwise to lock it in position 
• Plug inplace a hand over the lid and switch -on 
• Start with the slowest speed 
• To unlock the jar, turn it anticlockwise 

Auto Overload Protector (OLP)

The mixer /grinder comes equipped with protection against sudden overloads. In such situations, the OLP trips and the mixer /grinder shuts -off immediately. This protects the unit from burning and enhances the motor life. The OLP button is located at the bottom of the unit. The following figure shows the location of OLP in a mixer/grinder:

The following figure lists the steps involved case the mixer /grinder stops due to OLP 

• Switch -off the mixer /grinder 
• Wait for the motor to cool down 
• Reduce the ingredient load 
• Leeds the OLP button 
• Restart the unit 

Cleaning the mixer /grinder 

All the parts of a mixer /grinder such as jars, blades and the base unit should be cleaned thoroughly after every use. 

Cleaning the jars 

The following figure shows the steps of cleaning the jars of a mixer /grinder 

Step 1. Pour mild soap water into the jar 

Step 2. Place the jar on the base and run for some time 

Step 3. Remo7and wash the inside of the jar with water 

Step 4. Run the jar for 2-3 seconds 

Step 5. Keep the jar inverted to dry 

Cleaning the base unit 

The following figure shows the steps of cleaning the base unit of a mixer /grinder :

Step 1. Unplug the unit 

Step 2. Separate it from the jar 

Step 3. Clean thoroughly with a soft, damp cloth 

Step 4. Do not immerse the unit in water 

Cleaning the blades 

The following figure shows the steps of cleaning the blades of a mixer /grinder :

Step 1. Turn the jar upside down 

Step 2. Loosen the threaded bottom disc by turning it anti -clockwise 

Step 3. Remove the disc, sealing ring and blade

Step 4. Clean the under running water 

Step 5. Let the blade dry completely before storing