Once the purifier has been successfully installed, it is time to follow the post - installation process to ensure completion of the installation process. The post - installation process consists of tasks as shown in the following figure:
Post-installation process
Check the system's functioning
Providing to the customer
Documentation
Check the System's Functioning
Perform the checks as shown in the following figure to ensure that the purifier is working properly:
Switch on the power supply and check that all the connections are secure
⬇️
Turn on the inlet valve and check for leaks
⬇️
Turn on the storage tank valve
⬇️
Wait till the storage tank fills up
⬇️
Open the faucet to let the water flow ⬇️
Close the faucet and check for leaks
⬇️
Open the drain plug to remove any dust particles present in the pipes or storage
⬇️
Close the drain plug
Providing Guidance to the Customer
After installing the purifier, the field technician should give a demonstration of the working of the purifier. It is a way of promoting or showing the operation of purifier to the users. The goal of demonstrating is to show the customer how to operate and use the purifier. There are a few rules which must be considered while preparing for the demo. The following figure lists these rules:
Customize
your demo
Take customer Rehearse
Feedback. before
presenting
Test
everything
beforehand
Documentation
The last task of the post-installation process is to fill in all the details in the installation report clearly and get feedback from the customer. The following image shows a typical template clearly of the installation from that the field technician should gill-in after installing an RO system:
No comments:
Post a Comment